TRAINING DUMMY: Dragonblast - Flat Board Wing Chun Dummy (Made on Demand)

Wing Chun Flat Board Wooden Dummy

An essential training tool for Wing Chun Kung Fu, Jeet Kune Do, Kenpo Karate, and numerous other martial arts! This space saving model is perfect for training in limited spaces like Apartments, Dorm Rooms, etc.

Unlike traditional Mook Jongs that require a lot of space, this Flat Board model can be placed almost anywhere and only requires two screws to mount it.

If you've been looking for a way to practice your shapes and hand/arm positions but don't want to buy a normal-sized wing chun dummy then this may be the perfect solution for you. The arms are made from hardwood so you don't need to worry about their strength.

Installation is very simple. Just fasten it down with two screws and you're ready to start training.

Please note the backside of the dummy is not varnished.

Options:

- You can get the arms either 8 inches apart or 12 inches apart. This refers to the spacing between the top 2 arms and the middle arm only. (The tips of the top 2 arms will be about 8 inches apart on all models, but varies slightly with the options you pick). All the boards pictured have arms that are 12 inches apart. This allows you to train more punching techniques to the mid-section (for the head section you can mount one of our wall-bags above the device!) 8" is more traditional for wing chun dummies and wing chun structure training with the double hand movements. Most wing chun guys prefer 8 inches and most JKD guys prefer 12 inches. If you pick the 8-inch option, all of the arms will be set 4 inches lower, but the overall board size will not change (so there will be more room at the top).

- You can get the top 2 arms with the left side higher (traditional), parallel (modern), or right side higher (southpaw). All 3 versions are shown in the pictures.

- You can pick your color (all 3 pictured).

- For 2020 and beyond - all arms now have some play in them (move slightly) are removable. This used to be a $35 upgrade option that is now included. The moving arms have a rubber grommet between the arms and surface of the front so the do not scratch up the finish.

Specs:
Height - 24 inches
Width - 5.5 inches
Depth - 3 inches (with arms about 24 inches)
Distance between top and bottom holes - 22 inches
Arm Length - 10.5 inches

Order and Shipping:

Your dummy will be made on demand. This product is drop-shipped and guaranteed through the carpenter. Items are typically made and shipped out in about 1-4 weeks from the time you order. Shipping by USPS Priority Mail only. You will get an email after you place an order with the current wait times.