Wall Mounted RECOIL Stand

This is a RECOIL wall-mounted stand only. No Dummy included. We will need to get the dummy dimensions from you once the order is placed - this is to make sure the stand is made to work for your dummy. We need to know the following information: Longest protruding arm or leg tenon length out the back (to make sure it won't hit the stand). Your dummy's diameter. Distance you want the bottom of your dummy to be from the floor. It helps if you include this information with your order.

Unless your dummy has a hole in the bottom of it to accommodate a wooden shaft (i.e. it used to be on a portable free stand). Then you will need to purchase the retro fit kit.

Keep in mind that you will have to screw metal plates into the top and bottom of your dummy to hold the parts in place that allow the dummy to spin. The stand is ideal from someone 5' 10" [EWC Note: This carpenter measures heights by the nipple/mid chest level, not shoulder level. If your lineage measures height from the floor to the top arms be be at your shoulder height you will need to add a few inches]. To raise it higher you will need to add some wood under the bottom before screwing it into the wall. The stand must be sitting on something (the floor, a box, wood boards, etc) as well as being screwed to the wall in order for the recoil to work. The carpenter can build you a box for a small fee, if needed.

Recoil stands are made for Indoor use only. Outdoor weather/dirt/etc can erode the wood, rubber, and etc which will diminish the effectiveness and looks over time.

From the manufacturer:

The recoil reaction dummy stand is one of our newest and most exciting training tools we have to offer. This patent pending design takes your wooden dummy training to the next level by applying tension and recoil to your dummy. This stand "retro-fits all wooden dummies."

The way the recoil stand works, is two tension bands mounted to the lower sides of your dummy, crossed over in the back and mounted to the opposite side of the stand. This is what creates the tension needed to keep the dummy facing forward. The dummy which sits on a swivel base can pivit 90 degrees to the right and left, and always under tension. When released or you change position the dummy then will recoil back to center position. It always wants to return to the center. The base can be locked with two metal pins, if you choose to do the traditional forms wich require it not to rotate. When you want to freestyle just pull the pins and watch your dummy come alive. As with all of our stands you have height adjustment of 3 inch"s for multiple users. The height adjustment is only available for use with a warrior dummy.

The two main principles that this stand offers you is recoil and reaction. The recoil in that it will always recoil back to the center position after released. This means the deflection of the arms when blocked provide energy back toward you as in defending an actual strike. The reaction principle simply develops faster reflex's due to the fact that "this sucker hits you back." this is an excellent tool for the serious practitioner, who is looking to take there skills to the next level.

This stand is available in black and red and is 70 inches tall and 8 inches wide.

For the best explanation of this dummy, please watch the YouTube video below.

Build Times:
Stands generally take 4-7 weeks to construct.
Build times do vary based on season and order queue. We will send you an email after you order with the estimated wait time. Plan on the longer end of the estimate, as 95% of the time it is a longer wait.

Please email for shipping quote to Canada or Worldwide.